Importance of Hydraulic-Model Uncertainty in Flood-Stage Estimation
The delineation of the regulatory floodplain and determination of the respective flood stage is subject to hydraulic-model uncertainty in transforming the design discharge into a flood...

Instrumentation for Detailed Bridge-Scour Measurements
A portable instrumentation system is being developed to obtain channel bathymetry during floods for detailed bridge-scour measurements. Portable scour measuring systems have four components:...

Reference Surfaces for Bridge Scour Depths
Depth of scour is measured as the vertical distance between scoured channel geometry and a measurement reference surface. A scour depth measurement can have a wide range depending on the...

Uncertainty Analysis of the FEMA Method for Alluvial Fans
Distributary flow areas such as alluvial fans, bajadas, and alluvial slopes, and alluvial plains along mountain bases pose quite different and interesting problems for the design of hydraulic...

The Courant Number and Unsteady Flow Computation
The Courant number C, the key to unsteady flow computation, is a ratio of physical wave velocity, ?, to computational signal-transmission velocity, ?, i.e., C = ?/?. In this way, it uniquely...

Sediment and Water Quality Control Devices in Small Watersheds
The physical behavior and health of an alluvial stream depends on the extent of man's interferences in its tributary areas. In its natural setting a stream provides three main functions...

Relation of Channel Stability to Scour at Highway Bridges Over Waterways in Maryland
Data from assessments of channel stability and observed-scour conditions at 876 highway bridges over Maryland waterways were entered into a database. Relations were found to exist among...

Two Full-Scale Tests of Class 3 Composite Beams
This paper presents two tests of continuous composite beams comprising two 7.5 m spans and two concentrated loads close to the intermediate support. Although the cross-sections on the...

Report on Ship Channel Design
Report on Ship Channel Design (ASCE Manuals and Reports on Engineering Practice No. 80) was prepared by the Task Committee on Ship Channel...

Santa Barbara Harbor Assessment of Shoaling Frequency
The City of Santa Barbara is addressing the recurring problem of shoaling of its harbor entrance channel. The City relies on income generated from harbor businesses that in turn require...

Use of Portable Simulator in Designing Channel Improvements for Port of Brownsville, Texas
The Port of Brownsville, located at the southernmost tip of Texas, serves as an import/export port for both southern Texas and northern Mexico. The proposed channel improvement project...

The Talbert Channel Ocean Outlet Project
The Talbert Channel Ocean Outlet Project consisted of relocating and enlarging the outlet of a relatively narrow, shallow flood control channel in Southern California. Noteworthy aspects...

Should the U.S. Accept the Concept of Navigable Depth?
Navigable depth is defined as the maximum depth of water from the chart datum that is safe to accept as the bed of the channel, such that damage does not occur to a ship's hull and maneuverability...

Computation of Flow in Ice-Covered Dune-Bed Channels
A numerical method for solution of the Reynolds-averaged Navier-Stokes equations is developed to study the flow over sand dunes in two-dimensional channels. The method is applied to calculate...

A Shear Locking Free Three-Node Triangular Plate Bending Element for Moderately-Thick and Thin Symmetrically Cross-Ply Laminated Plates
A shear locking free three-node triangular plate bending element based on Reissner/Mindlin theory for symmetric general cross-ply laminated plates is developed. The element has total nine...

Computer Simulation of Granular Flows
Discrete-particle computer simulations using up to 15,000 identical spheres reproduce particle-scale information obtained from high-speed motion picture observations of disperse, collision-dominated...

Experimental Investigation of Bending and Twisting Coupling in Thin-Walled Composite Beams
The behavior of a thin-walled ppen section composite material beam depends on the anisotropic mechanical properties of the panels that form the beam. A beam theory has been proposed for...

Erosion of Steep River Banks and Time Evolution Towards Equilibrium Channel Shape
A numerical analysis of the time evolution of straight river channels is presented. The bed and bank, material is taken to be coarse, non-cohesive and uniform in size. As a result of the...

Granular Flow on a Bumpy Inclined Chute
Theoretical predictions for steady, uniform granular flows of identical, smooth, nearly elastic disks and spheres on bumpy inclined chutes are obtained. Kinetic constitutive theory is...

Continuum Model for Flows in Emergent Marsh Vegetation
Modeling of flows in tidal marshes requires modifications to the classical equations of open channel flow. In this study, the authors formulate an equivalent continuum model for tidal...

 

 

 

 

Return to search